Mareco Luce

Luminaire power & output - Ta 25°C

28,7W - 4000K - 3600 lm - 90-295V 50/60Hz

28,7W - 3000K - 3454 lm - 90-295V 50/60Hz

56,8W - 4000K - 6614 lm - 90-295V 50/60Hz

56,8W - 3000K - 6343 lm - 90-295V 50/60Hz

CUT-OFF

Step MacAdam 3

Lifetime:

L85/B50>60Kh - Tc 70°C-105°C

L90/B50>50Kh - Tc 70°C

Technical details

- Led's luminaire for parks and urban lighting

- Polyester powder coating after specific weathering resistance treatment

- Hole and terminal block 4x16mm² CLII with fuse holder and inspection door

- Pre-wired with cable 2x1,5mm² H07RN-F connected to the terminal block, for an easy installation

- Interlocking decorative side profile in PC (polycarbonate)

- Reinforced thermoplastic and painted front closure cap

- A2 stainless steel screws

- Anodized aluminum heat sink

- LED Circuit with n° 12 LED’s powered at 350mA (28,2W), in pole H3000mm (ground height)

- LED Circuit with n° 12 LED’s powered at 700mA (56,8W), in pole H4000mm (ground height)

- Driver IP67 included (DALI dimmable version available on request)

- PCB in IMS

Optics and lens

- Street optics medium

- Different optics availability according to the project needs, upon request:

- Street optics short

- Pedestrian optics

- Round symmetrical optics

- Non yellowing, transparent PMMA (acrylic) lens

Buried pole – System A

- Rectangular pole, in anodized and painted extruded aluminium, 90x125x3500/4600mm for plinth fixing

- 60° tilt bracket, in anodized and painted extruded aluminium L600mm in pole 3000mm high or L700mm in pole 4000mm high (ground height)

- Self-adhesive bituminous membrane, reinforced with a 1.5mm thick aluminum film, Class “E” fire resistant, stuck on the part of the pole that has to be placed under the ground for protection against corrosion and weathering

- Suggested plinth 600x600x700mm

Flanged pole – System B

- Rectangular pole, in anodized and painted extruded aluminium, 90x125x3000/4000mm complete with flange for floor fixing

- 60° tilt bracket, in anodized and painted extruded aluminium L600mm in pole 3000mm high or L700mm in pole 4000mm high (ground height)

- 250x200mm flange, 10mm thick made of hot-dip galvanized steel 75μm UNI EN 1461

- Suggested plinth 600x600x700mm

Compulsory accessory for System B

(to be ordered separately)

- Counter flange 250x200x3mm and M16x500mm anchor bolts, made of hot-dip galvanized steel 75μm UNI EN 1461

Optional accessory

(to be ordered separately)

Surge protection kit:

- Max impulse voltage UOC 10KV

- Voltage protection level L-N <1500V

- When purchased, the protection kit will be built-in the luminaire